EDGE EVO® Solo ESH400 Hi-O Controller

HID Global’s EDGE EVO® Solo ESHR40-L Controller/Reader and Module is a costeffective, stand-alone, single-door IP -enabled access control solution that distributes intelligence right to the door. EDGE EVO Solo provides the ability to power all devices around a door using Power over Ethernet (PoE), significantly reducing total door installation costs by removing the need to install a separate power supply. It also utilizes less expensive CAT5 wiring compared to traditional structured cable.

Because the user interfaces to the controller utilizes a standard web browser, there is no need to install software on a PC. After the controller is plugged into the local area network (LAN), it obtains its IPv4 address using DHCP or Static addressing. The user simply types the IP address into the web browser, which initiates a secure connection with the standalone panel. The All-in-One Door Dashboard provides a simple user interface where the site administrator can add user information, modify access rights, pull history reports, monitor door activity and provide general administration of the controller.
Sales price without tax $1.00

Model (and Part #): ESHR40-L (83120CKL000)

Mounting Holes – EHR40: US Single-gang and EU / APAC 60mm

Mounting Holes – ELM: Fits within US Single-gang or in hollow door frame

Dimensions – EHR40:  3.3″ W x 4.8″ H x 1.2″ D (83.9 mm x 122.2 mm x 30.5 mm)

Dimensions – ELM: 2.9″ W x 1.3″ H x 0.7″ D (73.0 mm x 32.0 mm x 19.0 mm)

Weight – EHR40: 6.3oz (180g)

Weight – ELM: 4.9oz (140g)

Operating Temperature: 32° to 122° F (0° to 50° C)

Operating Humidity: 5% to 95% relative, non-condensing

Communication Ports: Ethernet (10/100), Hi-O CANbus

13.56 MHz Card Compatibility: 13.56 MHz iCLASS HID Application, ISO14443A CSN

DC Input (MAX) @ PoE: 14.4W (300mA @ 48VDC)

DC Input (MAX) @ AUX +12VDC: 18W (1500mA @ 12VDC)

DC Input (MAX) @ AUX +24VDC: 36W (1500mA @ 24VDC)

Supervised Inputs Power (MAX) : 0.025W (5mA sink, 5V nominal) 0 to +5VCD Ref

DC Input @ PoE: 8W

DC Input @ AUX +12VDC: 13.1W

DC Input @ AUX +24VDC: 26.6W

Hi-O CANbus Output Voltage, DC Input = PoE: 24VDC

Hi-O CANbus Output Voltage, DC Input = AUX: AUX +VDC